DELUXE MULTI-LAYER VEHICLE PROTECTION FROM COVERCRAFT INDUSTRIES
Block-It 380 is Covercraft’s latest general protection fabric, available for most vehicles. Block-It 380 covers feature an inner film barrier that provides a balance of water resistance, breathability and softness and includes reinforced non-scratch grommets, elastic in the front and rear hem, and all the seams are double-stitched and overlapped.
The fabric is resistant to acid rain, industrial pollutants, tree sap and bird droppings. Air circulates easily through the fabric to help it dry quickly and reduce heat buildup. Three layer construction provides your vehicle with excellent out-door protection, and the material carries a 3-year warranty. It will not shrink or stretch and will retain its tailored shape.
To find out more about Block-It 380, and their other products and accessories, log on at www.covercraft.com.
GET SPACED WITH THIS TRACKSIDE CARB SPACER KIT FROM PROFORM PARTS
PROFORM’s Carb Spacer Kit allows you to make almost instant adjustments, optimizing your air/fuel flow rates, even in the pits. This Trackside Carb Spacer Kit includes a 1-inch thick frame and a choice of three inserts: open, standard four-hole and tapered four-hole. These lightweight phenolic spacers are heat resistant, providing minimal thermal transfer, and fighting vapor lock problems as well. The three inserts offer an easy way to tune your powerband.
The four-hole spacers accelerate airflow to improve low-end torque, while the open insert creates a high-rise manifold effect, increasing plenum volume and moving the throttle blades away from the roof of the manifold runners, improving air/fuel distribution and flow, adding mid-range and top-end power. These PROFORM spacers fit Holley 4150-style carburetors and PROFORM Race Series carbs.
For complete information visit their website at www.proformparts.com.
FOUR-PORT REGULATOR WITH O-RING FITTINGS NEW FROM PROFESSIONAL PRODUCTS
Professional Products now offers their new 4-port regulator featuring O-ring fittings with the regulator. Each regulator comes with one -8 inlet fitting and four -6 outlet fittings in addition to the ¼-inch NPT gauge port that is standard on all POWERFLOW regulators. With an adjustment range of 4.5 to 9 PSI and alcohol resistant Viton seals, these new regulators are perfect for your race or street car, regardless of what fuel you use. Offered in anodized blue or machined aluminum,
POWERFLOW regulators with O-ring fittings feature all-billet construction and polished stainless brackets.
For more information on their complete line of products visit www.professional-products.com.