Volume I, Issue 3, Page 39

BLACK OUT GAUGES

B&M’s all new Black Out Gauges offer a completely new look in gauge design. When the ignition key is switched off, the gauges black out and reveal only their aluminum-anodized bezel. Once the ignition key is switched to the on position, the gauges come to life! High intensity LED back lighting provides a gauge that is easily readable with a unique appearance.

A 270-degree sweep on the dial face indicates accurate readings throughout the entire range on these precision electronic gauges. Light blue numbers with a red LED pointer provide a dynamic look for simple viewing, especially in low light.

For more information contact visit www.bmracing.com

DO IT YOURSELF WITH ALUMINUM TUBING COILS FROM CLASSIC TUBE 

Available in 25-foot coils, this aluminum tubing is lightweight and easy to bend and flare. Classic Tube’s Aluminum small diameter tubing is 3003 alloy produced to ASTM B483 specifications. The .035-inch wall tubing is 0 temper (soft annealed) and Eddy Current tested to ensure quality and consistency. Aluminum coils are offered in 1/4, 5/16, 3/8, 1/2 and 5/8-inches outside diameter.

SAE male fittings are available in steel and stainless. -AN fittings come in steel, stainless and anodized aluminum. All fittings are machined to SAE J512 specifications.

For more information visit www.classictube.com

NEW PERFORMANCE ADDITIVE FOR WATER-TO-AIR INTERCOOLERS 

Chill Charger™ is a revolutionary new high performance additive to improve the efficiency of water-to-air intercoolers. It will enhance the thermal transfer of hot intake air to the water circulating through the intercooler resulting in a cooler denser intake charge for a boost in performance.

Also, Chill Charger is formulated with a corrosion inhibitor that balances and stabilizes the pH level to protect the core from rust, electrolysis and mineral deposits.  Also, Chill Charger contains an anti-foaming agent, is safe with all intercooler alloys and is 100% biodegradable, non-corrosive and non-toxic.

For more information visit www.DesignEngineering.com

HEATER HOTTER™ - DEI’S NEW PERFORMANCE
COOLING SYSTEM ENHANCER 

Design Engineering, Inc’s unique new product, Heater Hotter™, is a performance radiator additive specially formulated to rapidly absorb heat from the engine and transfer it to the cooling system without raising engine temperatures.

Accelerating the transfer of heat means 50% faster warm up to help an engine reach normal operating temperature.  This insures hot air is available for interior heat on command, even in sub-zero temperatures.

For more information visit www.DesignEngineering.com

**Send your new product press releases to newproducts@moparmax.com  

Here's What's New!